The other half of painting the upstairs includes finishing the bedroom. After finishing the loft, my painting resources (aka, my husband) would not be available to help for quite a while. So sometimes, you just have to do it yourself.
This is what I like to call sprint-painting. This occurred over a weekend where I didn’t have anything scheduled and my husband was scheduled for most of the weekend. Here’s how it went down:
Friday 10pm: Wash the layer of dust off, sleep in the middle of the room.
Sprint 3 – Saturday 11am: Shuffle stuff around and paint the other half while the first half dries. Head out and find lunch.
Sprint 4 – Saturday 3pm: Shuffle stuff back and paint the 2nd coat.
Sprint 5 – Saturday 8pm: Have your husband call and ask, “you painted? really?”
So, a lot has happened in my absence. Let’s just say I was entertaining lots and lots of guests over the past few weeks and I haven’t been able to update you properly.
In any case, guess what happened to the upstairs of Chez Boucher!?! If you’re watching my Flickr, you already know…we painted. Now, our upstairs is different than most capes… Normally you would see two bedrooms upstairs, but the previous owners added a half dormer and knocked down the wall one one bedroom to make a loft. I wanted to paint these to feel like the master suite that I always imagined the upstairs to be…so they got the same color.
Something I’m experimenting in this house is of matched pairs. The kitchen and the living room are both shades of yellow, the spare bedroom and the office are both grey, and the upstairs has teal in the loft and the bedroom. I wanted the rooms to feel bigger, and plus it allows us to easily share accessories between the rooms.
More on the bedroom later, but for now, here’s the color of the loft…
Now, with all the corners, it wasn’t without its oops…
…but this was because we decided to paint it freehand as opposed to tape off the ceiling, since the ceiling needs to be painted anyway. So, I can live with the oops, because I love the walls and the fact that I can finally hang stuff up. More on that later, too.
When I was test driving cars a few years back I wanted to try out Toyota’s new subcompact, the Yaris. This dealership was brave(?) enough to let my Mr and I test drive it on our own and bring it back when we were done. No sooner than the door closed did I start to hear giggling from the passenger seat.
Read the rest of this entry »
Hey! Now that robots are over I can post more!
Big Blue was a chest of drawers that my husband had brought along with him to NH that he had owned since childhood. Other than being bright blue, the thing was HEAVY. And we moved it 4 times before I really had a chance to fix it up.
Here’s the before:
I had started this project while I had a few weeks off from work, thinking I would be able to paint the room and the cabinet by the time I came back. Boy was I wrong. Big Blue was hiding not one, but FIVE layers of paint underneath: Bright blue, light blue, yellow, orange, and black. Although I got the room painted in time, I spent many evenings over the course of months just stripping the paint off.
Look at this grossness. This was the back of one of the old handles. Can’t look away, eh?
However, I’m very proud with how it turned out:
So how do you go from Big Bad Blue to Gorgeous? Actually pretty easy.
- Orbital sander – I use a Ryobi Random Orbit Sander. I love this one a lot because it fits nice in my hand and the weight of the battery is above the sander, which causes for a more even job.
- Sanding disks in various grits. The grit is the amount of coarseness in the disk. The lower the number, the grittier it is.
- White Paint – this was actually left over from the previous owners. We use it everywhere. I think it’s Lowes Ultra Pure White.
- Brown Paint – Behr Paint and Primer in Heirloom Mahogany. My husband calls it “Hersheys chocolate color”.
- Paint Brush – I prefer a 2″ brush when doing larger jobs that don’t need a ton of accuracy.
- 2″ Painters Tape
- Cabinet Pulls – also from The Depot. These came in a set of 10.
- Screwdriver (Phillips or Flathead, depending on the pulls)
Steps to remove the old paint:
- Remove the old handles. Stare at the grossness some more.
- Sand that mutha down. This was by far the worst part. Normally I don’t sand all the way down to the wood but with so many layers I wanted to start fresh on this one so that my finish was nice and clean. When you sand, start with the low numbers and work your way up. I started with some 60 grit here. This took forever – because of all the layers I would sand all evening, and I would only get through one of the drawers.
- Get fed up with sanding and grab some paint stripper. I did NOT want to use paint stripper. First of all, my work area is my basement – and I didn’t want to die from paint stripper fumes. I also don’t like to use chemicals in general, but the work was going far too slow. I chose Citristrip Paint and Varnish Stripper because it seemed like the least of the paint stripper evils. It has a citrusy smell but takes longer to work than the others – you spray it on, let it sit overnight, and then come back and strip it off with a wood scraper. I wish I took pictures of this, because it looked pretty darn bubbly and cool.
- Sand again to get an even finish. I used 120 and then 220 grit, just to even things out.
- Fill any holes/gashes with wood filler and sand. Any will do here.
- Clean the entire cabinet of dust. I used a mix of my vacuum and a can of compressed air.
Steps to paint the cabinet:
- Paint the whole thing your stripe color. This was very easy. Start by removing the drawers and work in nice, even strokes. I really like using a brush here because I like the texture it leaves, but you should be aware of the direction of “grain” you are creating. I also painted the shelve edge that was visible from the front, but not inside. Let it dry overnight.
- Tape your stripes. Put all the drawers back into the cabinet. I wanted to have the middle stripe centered over the drawer pulls and then have the other two 1/2″ away from that. You’re going to tape everything together – the top and the drawers – to get a consistent line. Make sure you press your finger down the edges to ensure your paint edge.
- Cut your lines and free your cabinets. I made a video for this one! Check it out:
- Remove the drawers & paint your top coat. I did two coats of the brown. Remember to keep your grain the same as the coat below. Let it dry overnight one last time. Get excited about finally being able to show it off!
- Convince your husband to help you carry it upstairs and add your hardware.
- Happy dance!
Goodbye Big Blue, Hello set of drawers I am proud to move a million times.